Home > Zonealarm Pro > Zonealarm Pro Firewall - Does It Create Issues With Bit-torrent?

Zonealarm Pro Firewall - Does It Create Issues With Bit-torrent?

Suddenly this had to happen...i tried changing the port from 6881 to 53000 but it did not have any effect... To save and activate this rules, press the Apply button and then the OK button. This is quite a serious issue which affects a lot of people, I'd much rather see it clearly outlined than to spend a month (on and off) battling to figure out I mean, they transfer just fine for, say, 30 minutes, and then everything just freezes up / dies on me. have a peek here

like blank screen or harddisk shut down or something, i onyl have blank screen on btw i also have another problem i can't seem to fix, i read many forum and This is just one of the many many problems people are having with it. Download speeds are the same as before. I decided to off my N360 firewall for a while.

Nothing unusual. If you do wish to supplement/ add another layer of defense - make sure it does not contain another anti-virus scanning module. This would allow incoming access for all TCP ports between, and including, 15697 and 15680. Add Incoming Ports Rule in Zone Alarm Select the protocol type, in our example it is TCP, enter a Description for the rule in the Description field (this is required

Typical, I've tried a few other firewall programs and ZA/ZAP are the best of a bad bunch. Likely this is only a temporary fix. Click 'Edit.' 4. For changes in this version, click here. was released to the public on July 26, 2010.

Bookmarks and history cleared. See changes. was released to the public on Jan 3, 2013. Advertisement nutrafrag Thread Starter Joined: Sep 11, 2008 Messages: 27 I got ZoneAlarm Free Firewall on my computer at work, and I am really happy with it. It's not like µTorrent will actualy transmit email, just some people choose same ports as email uses and ZoneAlarm thinks it's email Actualy AVG is making me nervous about that, it

I'd be very interested in reading. Even if you Turn Off Some features, they are Still Installed and will conflict with Zone Alarm. For changes in this version, click here. was released to the public on October 15, 2008. I'm sure I closed ZA down completely but it still crashed.

See changes. was released to the public on Apr 4, 2016. For changes in this version, click here. was released to the public on February 23, 2009. More hardening and other self-protection added to withstand an onslaught of attacks ("stability under fire") Early boot protection - new icon with a special tooltip now appears sooner during start-up (though my mirc client is continuously receiving data (logged from a tcp/ip incoming data program) it show there is data transfer, yet when i launch the browser or click send/recv mails /

Click on the Add button. navigate here It's quite odd. i.e uninstalled the factory installed security software completely and installed Zone Alarm Free and this works fine. Thank you.

I indeed read through your guidance/directions and you can tell my from message, I have tried both options. If you want examples, check their forums: http://forum.zonelabs.org/zonelabs i've left the forum. This fix only affected customers who purchased new Linksys routers in the weeks leading up to this release New and improved features in ZoneAlarm Pro version 3.0.133 Installer optimizations for users Check This Out See changes. was released to the public on Nov 20, 2012.

Tried to download MalwareBytes to check for other security issues - you guessed it, would not download So, went back to my Vista laptop which does not have ZoneAlarm on it It is also necessary to deselect "Stealth blocked ports" in "Advanced security settings" on the NIS Firewall options page, otherwise peers will not be able to make incoming connections resulting in Open CA Personal Firewall.2.

This is safer, because if we allow a specific port for a program, only that program will be allowed incoming access on the port, rather than any program.

When you click on the Add button you will be presented with a screen where you can enter the rule. See changes. was released to the public on Dec 27, 2014. As indicated above, this is limited to the new Windows 7 HP desktop only! What should i do now?(After having set static IP and forwarding utorrent listening ports?) Share this post Link to post Share on other sites Ultima 7 Advanced Member µTorrent Helper

If no VPN is required, this means that the Terminal Server or Remote Desktop is publicly visible and allows connections from anyone on the network and in most cases the Internet. http://Zonealarm.com nutrafrag, Oct 4, 2010 #1 Cookiegal Administrator Malware Specialist Coordinator Joined: Aug 27, 2003 Messages: 105,756 Well we can't help with no. 1 as we don't assist with P2P I'm using the latest ZA, v5.0.590.043. this contact form What's New?

These ports can generally be found by Googling for the name of the program and the word firewall. If you understand the concepts of IP addresses, then lets move on to TCP and UDP ports and how they work. Make sure your NIS Firewall configuration for µTorrent program contains two rules: an Inbound rule to permit TCP and UDP connections from any computer to the single local port your µTorrent to reset: 1.) Hold down the Ctrl and Shift keys together 2.) Right click on the ZA icon near your clock 3.) Choose 'Reset' from the box that comes up 4.)

If there was a range of ports we wanted to allow access we could add the range like 15697-15680. Please help me. For changes in this version, click here. 5.0.590.043 was released to the public on June 21, 2004. Top Crayon Shin Chan Minister of Gerbil Affairs Posts: 2295 Joined: Fri Sep 06, 2002 11:14 am Location: Malaysia Contact: Contact Crayon Shin Chan Website Quote #13 Thu Aug 12,

Goto Norton AntiVirus tab of Norton Protection Centre and click on Internet Worm Protection under Web Browsing in Settings2. Opening Ports in Zone Alarm Free or Pro for a particular program The safest method when opening ports with Zone Alarm is to specify the specific incoming ports you would like Interesting as I have yet another Vista based laptop which has NIS and ZA co-existing and working fine. Thanks.

Now you should have a new entry in the list, click ok again6. Advertisements do not imply our endorsement of that product or service. not complete and not freeze) at the tail end of the download. a) Filter By: Individually specified ports Locality : Local c) On the box, enter your port number.