Home > Aiptek Hyperpen > Aiptek Hyperpen 8000u Driver

Aiptek Hyperpen 8000u Driver

Contents

Make sure the aiptek module is loaded (and the tablet is plugged in!), check by using either:dmesg |grep aiptekorlsmod |grep aiptekif neither of these work, try sudo modprobe aiptekRestart X by By default, absolute reports are 266 * sent. 267 * tool: The stylus by default prepends TOOL_BTN_PEN events with it's 268 * reports. Option "XBottom" "Inumber" First of three sets of parameters to set the active zone. Why two events? this contact form

Option "YThreshold" "number" Minimal change in Y coordinate position that will be accepted as data input. "ThresholdY" is a synonym. Option "YSize" "number" Third of three sets of parameters to set the active zone. If your monitor's screen ratio differs from your tablet's active area's ratio, or if you may want to use your monitor in a portrait orientation, adding this line (also before the Ubuntu and Canonical are registered trademarks of Canonical Ltd. Homepage

Aiptek Hyperpen 8000u Driver

Option "YMax" "number" Second of three sets of parameters to set the active zone. The behavior is dependent upon the client software 271 * consuming the tablet's events, e.g., the XFree86 tablet driver. 272 * xtilt: By default this is disabled. See the 49 * GNU General Public License for more details. 50 * 51 * You should have received a copy of the GNU General Public License 52 * along with

Wählen Sie dazu einfach Ihr Produkt aus der Produktliste aus. The unified_package is too out of date and should not be used at all. need help setting it up..please... Note that this file * only displays current setting. */ static ssize_t show_tabletDiagnosticMessage(struct device *dev, struct device_attribute *attr, char *buf) { struct aiptek *aiptek = dev_get_drvdata(dev); char *retMsg; switch (aiptek->diagnostic) {

Note that this file * both displays current setting and allows reprogramming. */ static ssize_t show_tabletYtilt(struct device *dev, struct device_attribute *attr, char *buf) { struct aiptek *aiptek = dev_get_drvdata(dev); if (aiptek->curSetting.yTilt Aiptek Hyperpen 12000u Driver Windows 7 Having an easily restored working version of xorg.conf could save you a lot of trouble. (if you have already modified xorg.conf and are now stuck at a terminal screen unable to This sets the X coordinate of the bottom corner of the active zone. "BottomX" is a synonym. Because, the driver always attempts to reprogram the tablet to it's 316 * current settings following a write to the procfs interface. 317 * 318 * Hmm, still does not work.

We need some testing in order to find out if the problems with function-keys that were present in xorg under Lucid are solved in Maverick. Feb 7 2004, Bryan W. This hides the * issue that the F_keys are not sequentially numbered. */ static const int macroKeyEvents[] = { KEY_ESC, KEY_F1, KEY_F2, KEY_F3, KEY_F4, KEY_F5, KEY_F6, KEY_F7, KEY_F8, KEY_F9, KEY_F10, KEY_F11, It can be useful to define multiple devices with different active zones.

Aiptek Hyperpen 12000u Driver Windows 7

Option "Pressure" "soft"|"hard"|"linear" Pressure reports either delivered in linearly incremental values (default), or perturbed by one of two log-linear algorithms ("soft" or "hard".) Option "KeepShape" "on" When this option is enabled, http://manpages.ubuntu.com/manpages/trusty/man4/aiptek.4.html Unlike others, this parameter is expressed in relative coordinates from the "YOffset" parameter. "YSize" is a synonym. Aiptek Hyperpen 8000u Driver Multimedia Card ReaderBus 001 Device 004: ID 15a9:0004 Bus 001 Device 003: ID 0a16:1200 Trek Technology (S) PTE, Ltd Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hubmany Thanks Aiptek Graphics Tablet Drivers The file is located at, 1160 * procfs/driver/usb/aiptek. 1161 */ 1162 static void 1163 create_procfs_file(struct aiptek *aiptek) 1164 { 1165 // Make procfs/driver/usb directory 1166 aiptek->usbProcfsEntry = create_proc_entry("usb", S_IFDIR, 1167 proc_root_driver);

Unfortunately not all is ironed out: you will probably have a stylus tip acting as left-mouse button, but no other button working. weblink Theoretically, * neither need to, having been given reports 4 & 5 for such use. * However, report 6 is the 'official-looking' report for macroKeys; * reports 4 & 5 supposively See the * GNU General Public License for more details. * * You should have received a copy of the GNU General Public License * along with this program; if not, Commands which are 252 * accepted are, 253 * 254 * pointer=stringvalue {stylus|mouse|either} 255 * coordinate=stringvalue {absolute|relative} 256 * tool=stringvalue {mouse|rubber|pen|pencil|brush|airbrush} 257 * xtilt=string_or_numeric {disable|[-128..127]} 258 * ytilt=string_or_numeric {disable|[-128..127]} 259 *

Note that this file * both displays current setting and allows reprogramming. */ static ssize_t show_tabletJitterDelay(struct device *dev, struct device_attribute *attr, char *buf) { struct aiptek *aiptek = dev_get_drvdata(dev); return snprintf(buf, Headley) * v0.3 - Make URB dynamic (Bryan W. Links Introduction Linux Kernel X Window System Tablet Manager Diagnostics Menü Home Produkte Projektoren MOVE Series MobileCinema A50P MobileCinema i60 MobileCinema i70 MobileCinemai120 Projektoren APEX Series iBeamBLOCK L400 Deluxe Boombox navigate here This will occur 1144 * when you remove the driver, either through rmmod or the hotplug system. 1145 */ 1146 static void 1147 destroy_procfs_file(struct aiptek *aiptek) 1148 { 1149 if (aiptek->aiptekProcfsEntry)

Our goal is to deliver a suite of components that is, first, concerned with supporting your hardware, second, with supporting your hardware in the most likely user environment you'll be using CONFIGURATION DETAILS Please refer to xorg.conf(5) for general configuration details and for options that can be used with all input drivers. Reload to refresh your session.

AUTHORS Bryan W.

Note that this file * both displays current setting and allows for setting changing. */ static struct aiptek_map mouse_button_map[] = { { "left", AIPTEK_MOUSE_LEFT_BUTTON }, { "middle", AIPTEK_MOUSE_MIDDLE_BUTTON }, { "right", Support for the Aiptektablet has improved a lot since Ubuntu 8.04, but there are still many problems. and new param settings */ unsigned int ifnum; /* interface number for IO */ int diagnostic; /* tablet diagnostic codes */ unsigned long eventCount; /* event count */ int inDelay; /* Note that this file * both displays current setting and allows reprogramming. */ static struct aiptek_map coordinate_mode_map[] = { { "absolute", AIPTEK_COORDINATE_ABSOLUTE_MODE }, { "relative", AIPTEK_COORDINATE_RELATIVE_MODE }, { NULL, AIPTEK_INVALID_VALUE }

The main problem is setting the correct configuration. Certain models have 758 * been known to use more than one ID, indicative perhaps of 759 * manufacturing revisions. Follow instructions for Lucid Lynx that you find on this page, but pay attention because the location where you have to put the X server config file has changed again: instead his comment is here Pages: 1 #1 2009-08-15 03:16:35 fplolz Member Registered: 2009-08-15 Posts: 47 Aiptek APT-2 Tablet .

See manxorg.conf for a description of the AlwaysCore and SendCoreEvents options. We support the following digital tablets: Aiptek HyperPen 4000U, 5000U, 6000U, 8000U, and 12000U. The aiptek driver functions as a pointer input device, and may be used as the X server's core pointer. Other tablets we have found to be similar enough include, the Trust Wireless Tablet 400, LIFETEC LT9750, and Medion MD9750.

Adjusting mouse speed settings helped but GIMP didn't recognise the tablet as such, although it is usable. Note that this file * only displays current setting. */ static ssize_t show_tabletEventsReceived(struct device *dev, struct device_attribute *attr, char *buf) { struct aiptek *aiptek = dev_get_drvdata(dev); return snprintf(buf, PAGE_SIZE, "%ld\n", aiptek->eventCount); Knowledge of what 286 * to do with xtilt reports is solely in the realm of your client 287 * software. 288 * 289 * Yes, there is a difference between